Product Groups

Insulation Materials

Thermal and waterproof insulation — from floor blocks and membranes to rock wool and sealing mortars.

Brands in this group

Ytong · İzocam · Knauf · Köster · Onduline · Fox · Bonus Yalıtım

Ytong Floor Block
Sizes and variants
60×40×15 cm (G-1).
Application
Cuts easily, so it produces no waste on site. Because the pocketed block is solid and takes no concrete inside, it saves up to 15% of the concrete in a slab. The even soffit it leaves can also save 30–40% of the plaster.
EPS Floor Block
Sizes and variants
08-10 DNS 25×70×70 cm and 08-10 DNS 30×70×70 cm; other sizes supplied to special order.
Application
Placed between the ribs when casting a slab, giving a flatter ceiling.
Foamboard / XPS
Sizes and variants
2 · 3 · 4 · 5 cm.
Application
Used for thermal insulation on roofs, in cold stores, in industry and on site.
EPS Board
Sizes and variants
100×50 cm: 2 cm 12 m²/pack · 3 cm 8 m²/pack · 4 cm 6 m²/pack · 5 cm 5 m²/pack.
Application
Generally used for thermal insulation on roofs and walls.
Rock Wool
Sizes and variants
60×1200 mm, 3 / 5 / 10 cm, 50 / 100 / 120 kg/m³ packs. İzocam rock wool 60×1200 mm 5 cm premium F120, 2.16 m²/pack and 3.60 m²/pack.
Application
Used for thermal insulation. Made from volcanic rock.
Knauf Mineral Wool
Sizes and variants
Mineral Plus 120×60×5 cm, 14.4 m².
Vapour Barrier — Ondutiss Barrier Reflex
Sizes and variants
170 g/m².
Application
The most durable vapour-tight system; suitable for all roofs, ventilated or unventilated.
Onduline Fondaline 400
Sizes and variants
1 roll / 40 m² (drainage sheet).
Application
Used in foundations to waterproof against damage caused by groundwater and soil pressure.
Bituline Resista
Sizes and variants
RP 35s and RP 41s horizontal 10 m² per roll, 45s 8 m² per roll.
Application
A new-generation modified-bitumen waterproofing membrane for foundations and all foundation walls, including single-sided ones. The application needs neither protective felt nor a protective screed, and is long-lived.
Fox Multiplus 2K FS 542
Sizes and variants
28 kg pail.
Application
A flexible, solvent-free, two-component waterproofing material based on bitumen-rubber with cement and polymer modification, with crack-bridging capability.
Köster KBE
Sizes and variants
20 kg.
Application
Used for waterproofing. Watertight, with a wide service temperature range (−20 °C to +200 °C).
Köster Yıldırım Tozu
Sizes and variants
5 kg.
Application
Used to stop continuous water ingress and dry out the area treated. Also used to dry surfaces before waterproofing.
Köster NB 2000
Sizes and variants
20 + 10 (cement-based fully elastic waterproofing mortar).
Application
A cement-based, two-component waterproofing mortar with high elasticity. Once the powder and liquid components are mixed it is brushed onto surfaces such as concrete and render. Used to waterproof wet areas, balconies and terraces, ornamental pools, and reinforced-concrete surfaces in contact with soil.
Köster K 120 – W Pah Bandı
Sizes and variants
50 m · 1 roll per box.
Application
The felt carriers along its edges bond well with brush-applied liquid waterproofing products, forming a seamless insulation layer.
Fox Sea Plus FM 502
Application
A liquid capillary-waterproofing admixture: its active chemicals react with the by-products of cement hydration in fresh concrete, forming an insoluble crystalline structure in the pores and capillaries. That structure reduces the permeability of the concrete and can self-heal cracks below 0.4 mm.
Weber Dry 706 Plus
Sizes and variants
32 kg.
Application
A polymer-modified, bitumen-rubber based, two-component thick waterproof coating with high elasticity. Used on foundation walls, in wet areas, on balconies and terraces, over underground car parks and on garden terraces — against ground damp, seepage and both temporary and permanent water pressure.